Popular Post

Archive for 2013

DRAGONITE

By : K

DRAGONITE

149 / DRAGONITE - Pokémon Papercraft
Name: Dragonite
Type: Dragon/Flying
Species: Dragon Pokémon
Height: 2.2 m (7' 3")
Weight: 210.0 kg (463.0 lbs)
Interesting Facts: It can circle the globe in just 16 hours. It is a kindhearted Pokémon that leads lost and foundering ships in a storm to the safety of land. It evolves from Dragonair starting at level 55. It is the final evolutionary form of Dratini.

THE PAPER MODEL
Height: 19.8 cm/7.8 in
Width: 14.5 cm/5.7 in
Depth: 22.1 cm/8.7 in
No. of Pages: 8
Level: Medium

NOTES: Good luck / have fun!

Download: A4 / Letter

LATIOS

By : K

LATIOS

381 / Latios - Pokémon Papercraft
Name:
Latios
Type: Dragon / Psychic
Species: Eon Pokémon
Height: 1.85 m (6′07″)
Weight: 60 kg (132.3 lbs.)
Interesting Facts: Latios has the ability to make its foe see an image of what it has seen or imagines in its head. This Pokémon is intelligent and understands human speech. It will only open its heart to a trainer with a compassionate spirit. This Pokémon can fly faster than a jet plane by folding its forelegs to minimize air resistance. Even in hiding, it can detect the locations of others and sense their emotions since it has telepathy. Its intelligence allows it to understand human languages. It has a docile temperament and dislikes fighting.

THE PAPER MODEL
Height: 11 cm/4.3 in
Width: 41 cm/ 16.1 in
Depth: 37 cm/14.5 in
No. of Pages: 9
No. of Pieces: 61
Level: Medium

NOTES: Latios is a little easier than Latias because of its size which is much bigger. That said, the arms might still offer some challenge.

Download: A4 / Letter

LATIAS

By : K

LATIAS


380 / Latias - Pokémon Papercraft
Name:
Latias
Type: Dragon / Psychic
Species: Eon Pokémon
Height: 1.2 m (4′07″)
Weight: 40 kg (88.2 lbs.)
Interesting Facts: Latias is highly sensitive to the emotions of people. If it senses any hostility, this Pokémon ruffles the feathers all over its body and cries shrilly to intimidate the foe. It is highly intelligent and capable of understanding human speech. It is covered with a glass-like down. The Pokémon enfolds its body with its down and refracts light to alter its appearance.

THE PAPER MODEL
Height: 8 cm/3.1 in
Width: 28 cm/ 11 in
Depth: 31.0 cm/12.2 in
No. of Pages: 4
No. of Pieces: 61
Level: Hard

NOTES: Assembling and attaching the arms is specially challenging. Make sure to score and fold her tail fins for sharp lines.

Download: A4 / Letter

FLYGON

By : K

FLYGON

330 / FLYGON - Pokémon Papercraft
Name:
Flygon
Type: Ground/Dragon
Species: Mystic Pokémon
Height: 1.83 m (6′07″)
Weight: 82.01 kg (180.8 lbs.)
Interesting Facts: Flygon is a large, light green, insect-like dragon Pokémon. Flygon's tail has several dark green stripes and three green rhombus shapes at the end. Flygon has a pair of green rhombus-shaped wings, toeless feet and tri-clawed hands. Flygon has red-lensed "goggles" covering its eyes and a pair of green antennae. This dragon Pokémon is highly adapted to life in the desert. It's also known as "the spirit of the desert" due to the sound its wings make in sandstorms. When it flaps its wings, it inadvertently kicks up a cloud of dust, which serves to protect it from potential enemies. The flapping wings create a very unusual "singing" sound. Because this sound is usually heard in the presence of sandstorms, it was thought that this Pokémon was the spirit of the desert.

THE PAPER MODEL
Height: 18 cm/ 7.1 in
Width: 26.1 cm/ 10.3 in
Depth: 20.2 cm/8 in
No. of Pages: 6
No. of Pieces: 56
Level: Hard

NOTES: Text File with instructions included with the craft.
Edit- Sorry about not including the instructions, fixed now.

Download: A4 / Letter

RESHIRAM

By : K

RESHIRAM


643 / RESHIRAM - Pokémon Papercraft
Name: Reshiram
Type: Dragon/Fire
Species: White Yang Pokémon
Height: 3.2 m (10′6″)
Weight: 330.0 kg (150.0 lbs.)
Interesting Facts: Reshiram and its counterpart Zekrom are based on the concept of yin and yang.

THE PAPER MODEL
Height: 22.0 cm/8.7 in
Width: 26.8 cm/ 10.6 in
Depth: 23.9 cm/9.4 in
Pages: 6
Pieces: 96
Level: Hard

NOTES: Some notes included in the files. Shiny now included in the download packs.

Download: A4 / Letter

GIBLE

By : K

GIBLE





443 / GIBLE - Pokémon Papercraft
Name: Gible
Type: Dragon / Ground
Species: Land Shark Pokémon
Height: 0.7 m (2′04″)
Weight: 20.5 kg (42.5 lbs.)
Interesting Facts: Gible hide in their holes and wait for prey to pass by. They occasionally hold dare competitions with each other which can put them in danger. When they bite, they hurt themselves out of clumsiness. It has been depicted in the anime that Gible licks people it is fond of, like a dog. It evolves into Gabite starting at level 24, which evolves into Garchomp starting at level 48.

THE PAPER MODEL
Height: 12.0 cm/4.7 in
Width: 15.7 cm/ 6.2 in
Depth: 15.4 cm/6.1 in
Pages: 3
Pieces: 43
Level: Easy/Medium
NOTES: Build from the fin down, closing between the legs at the bottom. When attaching the jets to the head, put a somewhat large drop of glue onto the ends of the points on the head, so that it anchors on the inside of the jets. You also have the choice of notched fin or un-notched fin when building.
The only really difficult part about this are the jets- besides them, this craft is really simple. Just take care with the smaller parts and you should have no trouble.

Download: A4 / Letter

RAYQUAZA

By : K

RAYQUAZA


384 / RAYQUAZA - Pokémon Papercraft
Name: Rayquaza
Type: Dragon / Flying
Species: High Sky Pokémon
Height: 7.0 m (23'00″)
Weight: 206.5 kg (455.2 lbs.)
Interesting Facts: Rayquaza constantly flies around the globe in the ozone layer, stopping and descending only to land on the peak of the Sky Pillar to rest. It is extremely territorial and will attack any intruders of its home. Due to the fact that it can calm the other members of the Weather Trio, it can be seen to be considered a leader and calm.

THE PAPER MODEL
Height: 37.4 cm/14.7 in
Width: 26.1 cm/ 10.3 in
Depth: 24.1 cm/9.5 in
Pages: 8
Pieces: 130
Level: Hard

NOTES: Many of the body pieces are quite repetitive, but when it comes to the arms and hands be sure to take your time and be very careful. These parts, along with the fins, are what constitute the difficulty. Other than that, all of the pieces of the body are numbered, so just match them up as you go and it is fairly straight forward. Also note that the fins are designated to the body piece by the numbers on the end of each body section. When attaching each fin, check that the curve of it lines up with the curve on the body. Each one goes to a specific place on the tube (Inside of the curve, outside). It is also suggested to leave one end of each body section open until all fins are attached, so that you can apply pressure from the inside.

Download: A4 / Letter

BAGON

By : K

BAGON




371 / BAGON - Pokémon Papercraft
Name: Bagon
Type: Dragon
Species: Rock Head Pokémon
Height: 0.6 m (2′00″)
Weight: 42.1 kg (92.8 lbs.)
Interesting Facts: Bagon harbors a never-ending dream of one day soaring high among the clouds. As if trying to dispel its frustration over its inability to fly, this Pokémon slams its hard head against huge rocks and shatters them into pebbles. They also hurl themselves off cliffs in vain attempts to fly.

THE PAPER MODEL
Height: 13.0 cm/ 5.1 in
Width: 7.4 cm/ 2.9 in
Depth: 8.6 cm/3.4 in
Pages: 2
Pieces: 30
Level: Easy

NOTES: Build from the top down, closing at the feet. Attach the 'crest' before advancing too far, so you have room to apply pressure to secure it. Also, take care with the teeth; they're pretty small, and can be somewhat fiddly. Also, it's suggested that you add a weight in between the legs to help it balance.

Download: A4 / Letter

SHELGON

By : K

SHELGON


372 / SHELGON - Pokémon Papercraft
Name: Shelgon
Type: Dragon
Species: Endurance Pokémon
Height: 1.1 m (3′07″)
Weight: 110.5 kg (243.6 lbs.)
Interesting Facts: Upon evolution from Bagon, bone structures have formed all around the Pokémon's body, becoming a shell with two openings: one in front, leaving only its yellow eyes visible, and one in back. Inside the structures, its body is busy forming for its next evolution, although its gray-colored legs are visible extending from the shell’s underside. The inner portions of the legs have red coloration, and there are three ridges on the top of its shell.

THE PAPER MODEL
Height: 13.0 cm/ 5.1 in
Width: 12.1 cm/ 4.8 in
Depth: 11.9 cm/ 4.7 in
Pages: 4
Pieces: 34
Level: Easy

NOTES: Pretty straightforward build. Start at the front, close at the back. Attach the fins and legs when possible. Be sure the legs are level before attaching.

Download: A4 / Letter

SALAMENCE

By : K

SALAMENCE



373 / SALAMENCE - Pokémon Papercraft
Name: Salamence
Type: Dragon/Flying
Species: Dragon Pokémon
Height: 1.5 m (4′11″)
Weight: 102.6 kg (226.2 lbs.)
Interesting Facts: Salamence is an extremely vicious Pokémon. It is also arrogant about its victories by spouting intense flames into the air. This behavior may be explained due to the fact that it faced many hardships to get its wings to grow, and therefore, it is very proud of its achievement.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 25.7 cm/ 10.1 in
Depth: 38.2 cm/ 15.0 in
Pages: 10
Pieces: 58
Level: Medium/Hard

NOTES: Build from head back, closing at the tail or the bottom of the rear feet. It is suggested to reinforce the wings so the joint is stronger.

Download:
A4 / Letter

GIRATINA

By : K

GIRATINA


487 / GIRATINA - Pokémon Papercraft
Name: Giratina
Type: Ghost/Dragon
Species: Renegade Pokémon
Height: 4.5 m (14′09″)
Weight: 750.0 kg (1653.5 lbs.)
Interesting Facts: Giratina is able to travel through and control dimensions besides those of time and space. When in its Origin Forme, it is able to pass through dimensions at will, however, it will turn back to its Altered Forme due to the gravity change from the Reverse World. It does so by emitting a whirlwind from its mouth which creates a portal.

THE PAPER MODEL
Height: 21.0 cm/ 8.3 in
Width: 31.0 cm/ 12.2 in
Depth: 23.5 cm/9.3 in
Pages: 9
Pieces: 84
Level: Medium/Hard

NOTES: Build from the tail on. Following the numbers here is really important. Build the legs and before attaching them to the body, glue all of the nails and yellow parts to them. On the middle yellow neck part build pieces 58 and 65, glue the wings to them and only after that glue pieces 59 and 66, after that is done, glue to the body. The head is easy just be careful to follow the numbers.

After quite some time, the wings may start to sag and need to be reinforced with wire or scrap to keep them up.

Download: A4 / Letter

KINGDRA

By : K

KINGDRA


230 / KINGDRA - Pokémon Papercraft
Name: Kingdra
Type: Water/Dragon
Species: Dragon Pokémon
Height: 1.8 m (5′11″)
Weight: 152.0 kg (335.1 lbs.)
Interesting Facts: Kingdra is a larger, more elegant version of Seadra. It has beautiful fins that wave in the water as it swims. Its head has a crest-like fin along its cheeks. Its head can also turn 360 degrees. Its belly scales are now more compact, unlike Seadra. The snout has also become thinner and more powerful, allowing squirts of water jets with devastating power.

THE PAPER MODEL
Height: 22.6 cm/ 8.9 in
Width: 9.0 cm/ 3.5 in
Depth: 18.6 cm/ 7.3 in
Pages: 3
Pieces: 33
Level: Medium

NOTES: Follow the numbers, being careful with the head and fins. Close at the tail. Additional notes and references included.

Download: A4 / Letter

FRAXURE

By : K

FRAXURE


611 / FRAXURE - Pokémon Papercraft
Name: Fraxure
Type: Dragon
Species: Axe Jaw Pokémon
Height: 1.0 m (3′03″)
Weight: 36.0 kg (79.4 lbs.)
Interesting Facts: Fraxure is a bipedal Pokemon and have two huge tusks coming out of his mouth that are capable of breaking boulders. They are really violent Pokemon and also territorial. They often fight and in those fights they tusks can break, but, unlike Axew’s, they don’t regenerate. They live in riversides with rocks, where they can sharp the tusks after fights.

THE PAPER MODEL
Height: 16.0 cm/ 6.2 in
Width: 20.7 cm/ 8.1 in
Depth: 20.8 cm/ 8.1 in
Pages: 5
Pieces: 56
Level: Medium

NOTES: Notes included. Follow the numbers, but be sure to attach any relevant parts (tusks-head, arms-body) before closing those parts.

Download: A4 / Letter

HYDREIGON

By : K

HYDREIGON


635 / HYDREIGON - Pokémon Papercraft
Name: Hydreigon
Type: Dark/Dragon
Species: Brutal Pokémon
Height: 1.8 m (5′11″)
Weight: 160.0 kg (352.7 lbs.)
Interesting Facts: Hydreigon are really violent Pokémon, attacking anything it sees. On the tip of its arms there are dark blue heads, which gives it three heads, all of which are adorned by a fuchsia collar. It has six wings, pointy legs, and a spiked tail. It’s a pseudo-legendary, but unlike other pseudo legends, it has Special Attack as its higher stat, instead of the others that have Attack. It’s also the Pokémon that takes the most time to evolve, doing so at level 64. It can learn attacks of all types except grass.

THE PAPER MODEL
Height: 19.0 cm/ 7.4 in
Width: 26.6 cm/ 10.2 in
Depth: 28.0 cm/ 11.0 in
Pages: 7
Pieces: 107
Level: Medium-Hard

NOTES: Following the numbers on this model is really important. Start by the head to the middle of the body attaching the wings as soon as possible. Build also from the tip of the tail t the middle attaching the legs as soon as possible. Before closing add weight in it, making it stay on the tail. Close at the indicated piece. More instructions are added in the download pack.

Download: A4 / Letter

ZEKROM

By : K

ZEKROM

644 / ZEKROM - Pokémon Papercraft
Name: Zekrom
Type: Dragon/Electric
Species: Deep Black Pokémon
Height: 2.9 m (9′06″)
Weight: 345.0 kg (760.6 lbs.)
Interesting Facts: Zekrom is a bipedal Pokémon of dragon- and dinosaur-like basis. Zekrom is mainly a shade of dark gray, with darker patches on various portions of its body. It has red eyes (although in some scenes its eyes are depicted as having white irises and red sclera) and a small horn-like protrusion on the tip of its snout, with its head sporting a plume tipped with light-blue coloration. At the base of its neck is a black, stud-like feature, and atop its shoulders are similar, larger features resembling armor padding. The bases of its wings also have such padding, and a fanned, splayed, seemingly webbed shape with a small "wing-spike" on one edge. The lower length of Zekrom's arms extenuate into splayed, seemingly webbed, somewhat baseball-mitt-like formations, with three-clawed, dark-colored hands on the undersides. The front portion of Zekrom's waist is black-colored, with its belly and thighs having thin striations down their length. Its knees are black, as are the foremost parts of its three-clawed feet and spiked heels. Zekrom's tail consists of large, round, conical and spiked formation, likened to an electricity generator, with a black inner portion and bands on the tip of the outside portion.

THE PAPER MODEL
Height: 28.6 cm/ 11.3 in
Width: 27.2 cm/ 10.7 in
Depth: 35.7 cm/ 14.1 in
Pages: 11
Pieces: 145
Level: Hard

NOTES: Build from the head down. Be careful with the wings, shoulders, and hands, attaching limbs as you go. Attach the legs before moving to the tail, and close at the tip of the tail. Base included, as model is quite tail heavy. This is a difficult model, do not attempt without considerable experience.

Download: A4 / Letter

GARCHOMP

By : K

GARCHOMP


445 / GARCHOMP - Pokémon Papercraft
Name: Garchomp
Type: Dragon/Ground
Species: Mach Pokémon
Height: 1.9 m (6′03″)
Weight: 95.0 kg (209.4 lbs.)
Interesting Facts: Garchomp are dark blue, with a red underbelly that covers from the middle of its abdomen, to its jaws, and then to the undersides of its arms. Underneath the red is a gold diamond shape as well a gold cross on its snout; which gives Garchomp a close resemblance to Sharpedo, with close to the same body color as it. Garchomp have appendages that resemble jets, planes and hammerhead sharks; its four fins, one on each arm, one dorsal fin and another on its tail that resembles a shark tailfin; horns that resemble jet/plane engines rest on its head, resembling a hammerhead. It has spikes on its hind limbs and arms as well as sharper claws than its previous evolution. Its eyes have black scleras and gold-colored irises. Its pupils have shrunk.

THE PAPER MODEL
Height: 17.0 cm/ 6.7 in
Width: 20.8 cm/ 8.2 in
Depth: 25.8 cm/ 10.2 in
Pages: 5
Pieces: 94
Level: Hard

NOTES: Build from head down, attaching teeth, arms, and fins as possible. Further notes included. It's a tough model, so if you're just starting out try something else as a warm up.

Download: A4 / Letter

DRATINI

By : K

DRATINI 


147 / DRATINI - Pokémon Papercraft
Name: Dratini
Type: Dragon
Species: Dragon Pokémon
Height: 1.8 m (5'11")
Weight: 3.3 kg (7.3 lbs)
Interesting Facts: Dratini are timid, elusive, and extremely shy Pokémon, and thus are rarely seen, resulting in the belief that they are mythological among certain communities in Kanto.

THE PAPER MODEL
Height: 14.5 cm/ 5.7 in
Width: 10.8 cm/ 4.3 in
Depth: 16.1 cm/ 6.3 in
No. of Pages: 2
Level: Easy

NOTES: Start at the head and close at the tail. Be careful with the head wings, and attach them before continuing past the head. Further instructions on the template.

Download: A4 / Letter

Gabite

By : K
444 / Gabite - Pokémon Papercraft
Name: Gabite
Type: Dragon/Ground
Species: Cave Pokémon
Height: 1.4 m (4'07")
Weight: 56.0 kg (123.5 lbs)
Interesting Facts: Gabite are fierce and predatory dragons, known for their scales that have medicinal properties and can heal most illnesses. Gabite have short, yet deadly sharp teeth, like their pre-evolution, Gible. They have been known to move at extreme speeds.

THE PAPER MODEL
Height: 17.5 cm/ 6.9 in
Width: 16.9 cm/ 6.7 in
Depth: 19.9 cm/ 7.8 in
No. of Pages: 4
Level: Medium
NOTES: Start at the top of the head, close at the foot, following the numbers. Attach the jets on the head whenever possible, as well as claws as you go.

Download:A4/Letter

DRUDDIGON

By : K

DRUDDIGON

621 / Druddigon - Pokémon Papercraft
Name: Druddigon
Type: Dragon
Species: Cave Pokémon
Height: 1.6 m (5'03")
Weight: 139.0 kg (306.4 lbs)
Interesting Facts: Druddigon's bright red head is very hard, being harder than rock and very rough. It can take in sunlight with its wings; if its body temperature lowers, it becomes immobile. It has savage physical strength.

THE PAPER MODEL
Height: 19.0 cm/ 7.5 in
Width: 21.3 cm/ 8.4 in
Depth: 23.2 cm/ 9.1 in
No. of Pages: 6
Level: Hard

NOTES: The model is built into two segments: head and body. Start the head at the top and close at the bottom. Be carefull, it's the hardest part of the model. The mouth connection can be tricky too. The body starts at the tail and close at the neck. Glue the spikes as you go. The wings are tricky too, instructions on how to build them (and some other instructions too) are included on the template. Before closing, glue the wings to the body and add some weight untill it stands.


Download:A4/Letter 

- Copyright © Dragon - Date A Live - Powered by Blogger - Designed by Johanes Djogan -